EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Temperature in the Wire Drawing Process on the Wear of Drawing Dies

Maciej Suliga iD, Piotr Szota iD, Monika Gwoździk, Joanna Kulasa, Anna Brudny iD

Materials · 10.10.2024 · 17 (20) · 4949

DOI: 10.3390/ma17204949 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.10.2024. Verfasst von Maciej Suliga und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Armii Krajowej 19, 42-201 Czestochowa, Poland. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a wear analysis of tungsten carbide drawing dies in the process of steel wire drawing. The finite element method (FEM) analysis showed a significant correlation between drawing die geometry, single reduction size and drawing speed on the rate of drawing die wear. It has been shown that in steel wire drawing at higher drawing speeds, intense heating of the drawing die occurs due to friction at the wire/drawing die interface, leading to premature wear. Tribological tests on the material for the drawing die cores (94%WC+6%Co) confirmed the gradual abrasion of the steel and carbide sample surfaces with the “products” of abrasion sticking to their surfaces. The increase in temperature increases the coefficient of friction, translating into accelerated wear of the drawing dies.

Schlagwörter

Stichwörter der Autor:innen

FEMdie wearfrictionsteeltribologytungsten carbidewire drawing

Autor:innen und Institutionen

  • Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Armii Krajowej 19, 42-201 Czestochowa, Poland.
  • Łukasiewicz Research Network-Institute of Non-Ferrous Metals, Sowińskiego 5, 44-100 Gliwice, Poland.

ORCID-Profile: Maciej Suliga, Piotr Szota, Anna Brudny

Zitieren

APA

Suliga, M., Szota, P., Gwoździk, M., Kulasa, J., & Brudny, A. (2024). The Influence of Temperature in the Wire Drawing Process on the Wear of Drawing Dies. Materials, 17(20), 4949. https://doi.org/10.3390/ma17204949

Vancouver

Suliga M, Szota P, Gwoździk M, Kulasa J, Brudny A. The Influence of Temperature in the Wire Drawing Process on the Wear of Drawing Dies. Materials. 2024;17(20):4949. doi:10.3390/ma17204949

BibTeX
@article{Suliga2024,
  author = {Suliga, Maciej and Szota, Piotr and Gwoździk, Monika and Kulasa, Joanna and Brudny, Anna},
  title = {The Influence of Temperature in the Wire Drawing Process on the Wear of Drawing Dies},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {20},
  pages = {4949},
  doi = {10.3390/ma17204949}
}
Kostenlos starten →