Reliability and validity of estimated angles information assessed using inertial measurement unit-based motion sensors
Bio-Medical Materials and Engineering · 2024-09-05 · 35 (5) · 439-450
DOI: 10.3233/bme-240031 ↗At a glance
Validierungsstudie in Bio-Medical Materials and Engineering, published on 2024-09-05. Written by Taiki Morikawa and 3 co-authors. Institution: Department of Rehabilitation, Eniwa Hospital, Eniwa-shi, Japan. Major MEDLINE topics: Movement. Cited 2 times so far (Crossref); 37 references.
Abstract (original language)
BACKGROUND: Inertial measurement unit (IMU)-based motion sensors are affordable, and their use is appropriate for rehabilitation. However, regarding the accuracy of estimated angle information obtained from this sensor, it is reported that it is likely affected by velocity. OBJECTIVE: The present study investigated the reliability and validity of the angle information obtained using IMU-based sensors compared with a three-dimensional (3D) motion analyzer. METHODS: The Euler angle obtained using the 3D motion analyzer and the angle obtained using the IMU-based sensor (IMU angle) were compared. Reliability was assessed by comparing the Bland–Altman analysis, intra-class correlation coefficient (ICC) (1,1), and cross-correlation function. The root mean square (RMS) error, ICC (2,1), and cross-correlation function were used to compare data on the Euler and IMU angles to evaluate the validity. RESULTS: Regarding reliability, the Bland–Atman analysis indicated no fixed or proportional bias in the angle measurements. The measurement errors ranged from 0.2° to 3.2°. In the validity, the RMS error ranged from 0.3° to 2.2°. The ICCs (2,1) were 0.9. The cross-correlation functions were >0.9, which indicated a high degree of agreement. CONCLUSION: The IMU-based sensor had a high reliability and validity. The IMU angle may be used in rehabilitation.
Subjects
MeSH terms (MEDLINE)
Author keywords
Authors and institutions
- Department of Rehabilitation, Eniwa Hospital, Eniwa-shi, Japan.
- Graduate School, Yamagata Prefectural University of Health Sciences, Yamagata-shi, Japan.
Cite
APA
Morikawa, T., Mura, N., Sato, T., & Katoh, H. (2024). Reliability and validity of estimated angles information assessed using inertial measurement unit-based motion sensors. Bio-Medical Materials and Engineering, 35(5), 439-450. https://doi.org/10.3233/bme-240031
Vancouver
Morikawa T, Mura N, Sato T, Katoh H. Reliability and validity of estimated angles information assessed using inertial measurement unit-based motion sensors. Bio-Medical Materials and Engineering. 2024;35(5):439-450. doi:10.3233/bme-240031
BibTeX
@article{Morikawa2024,
author = {Morikawa, Taiki and Mura, Nariyuki and Sato, Toshiaki and Katoh, Hiroshi},
title = {Reliability and validity of estimated angles information assessed using inertial measurement unit-based motion sensors},
journal = {Bio-Medical Materials and Engineering},
year = {2024},
volume = {35},
number = {5},
pages = {439--450},
doi = {10.3233/bme-240031}
}
EUVIMED