EUVIMEDEUVIMED entdecken
Crossref

Fan-Out Wafer-Level Packaging (FOWLP) of Large Chip with Multiple Redistribution Layers (RDLs)

John Lau, Ming Li, Nelson Fan, Eric Kuah, Zhang Li, Kim Hwee Tan, Tony Chen, Iris Xu, Margie Li, Y. M. Cheung, Wu Kai, Ji Hao und 14 weitere

Journal of Microelectronics and Electronic Packaging · 01.10.2017 · 14 (4) · 123-131

DOI: 10.4071/imaps.522798 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Microelectronics and Electronic Packaging, erschienen am 01.10.2017. Verfasst von John Lau und 25 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 21 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study is for fan-out wafer-level packaging with chip-first (die face-up) formation. Chips with Cu contact-pads on the front side and a die attach film on the backside are picked and placed face-up on a temporary-glass-wafer carrier with a thin layer of light-to-heat conversion material. It is followed by compression molding with an epoxy molding compound (EMC) and a post-mold cure on the reconstituted wafer carrier and then backgrinding the molded EMC to expose the Cu contact-pads of the chips. The next step is to build up the redistribution layers (RDLs) from the Cu contact-pads and then mount the solder balls. This is followed by the debonding of the carrier with a laser and then the dicing of the whole reconstituted wafer into individual packages. A 300-mm reconstituted wafer with a package/die ratio = 1.8 and a die-top EMC cap = 100 μm has also been fabricated (a total of 325 test packages on the reconstituted wafer). This test package has three RDLs; the line width/spacing of the first RDL is 5 μm/5 μm, of the second RDL is 10 μm/10 μm, and of the third RDL is 15 μm/15 μm. The dielectric layer of the RDLs is fabricated with a photosensitive polyimide and the conductor layer of the RDLs is fabricated by electrochemical Cu deposition (ECD).

Zitieren

APA

Lau, J., Li, M., Fan, N., Kuah, E., Li, Z., Tan, K. H., Chen, T., Xu, I., Li, M., Cheung, Y. M., Kai, W., Hao, J., Beica, R., Taylor, T., Ko, C., Yang, H., Chen, Y. H., Lim, S. P., Lee, N. C., …, & Lee, R. (2017). Fan-Out Wafer-Level Packaging (FOWLP) of Large Chip with Multiple Redistribution Layers (RDLs). Journal of Microelectronics and Electronic Packaging, 14(4), 123-131. https://doi.org/10.4071/imaps.522798

Vancouver

Lau J, Li M, Fan N, Kuah E, Li Z, Tan KH, et al. Fan-Out Wafer-Level Packaging (FOWLP) of Large Chip with Multiple Redistribution Layers (RDLs). Journal of Microelectronics and Electronic Packaging. 2017;14(4):123-131. doi:10.4071/imaps.522798

BibTeX
@article{Lau2017,
  author = {Lau, John and Li, Ming and Fan, Nelson and Kuah, Eric and Li, Zhang and Tan, Kim Hwee and Chen, Tony and Xu, Iris and Li, Margie and Cheung, Y. M. and Kai, Wu and Hao, Ji and Beica, Rozalia and Taylor, Tom and Ko, CT and Yang, Henry and Chen, Y. H. and Lim, Sze Pei and Lee, N. C. and Ran, Jiang and Wee, Koh Sau and Yong, Qingxiang and Xi, Cao and Tao, Mian and Lo, Jeffery and Lee, Ricky},
  title = {Fan-Out Wafer-Level Packaging (FOWLP) of Large Chip with Multiple Redistribution Layers (RDLs)},
  journal = {Journal of Microelectronics and Electronic Packaging},
  year = {2017},
  volume = {14},
  number = {4},
  pages = {123--131},
  doi = {10.4071/imaps.522798}
}
Kostenlos starten →