EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pine Bark as a Lignocellulosic Resource for Polyurethane Production: An Evaluation

Alexander Arshanitsa iD, Matiss Pals iD, Alexandra Vjalikova, Laima Vevere iD, Oskars Bikovens iD, Lilija Jashina

Polymers · 29.12.2025 · 18 (1) · 96

DOI: 10.3390/polym18010096 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.12.2025. Verfasst von Alexander Arshanitsa und 5 weiteren Autor:innen. Beteiligte Einrichtung: Latvian State Institute of Wood Chemistry, Dzerbenes Street 27, LV-1006 Riga, Latvia. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovation in Forest Management and Value Chain for Latvia’s Growth: New Forest Services. Products and Technologies.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the potential of pine bark—a highly accessible and underexploited by-product of forestry and food processing—as a renewable raw material for rigid polyurethane (PUR) foam production. Under optimal extraction conditions, water-soluble extractives rich in carbohydrates were isolated from biomass with a yield of 25% and subsequently condensed with propylene carbonate (PC) to produce bio-based polyols. The polyols synthesized at a PC/OH molar ratio ranging from 1 to 5 were incorporated into rigid PUR foam formulations as substitutes for commercial polyether polyols. The foams containing bio-polyols synthesized at a PC/OH ratio of 3 demonstrated the highest compressive strength and thermal insulation performance, exceeding those of the reference material by 30% and 9%, respectively, and exhibited enhanced thermo-oxidative stability. Incorporation of extracted bark up to 10 wt% as a filler in the PUR matrix led to a decrease in mechanical properties to the level of the reference foam and a 19% reduction in thermal insulation capacity, without affecting the closed-cell content. Cone calorimetry revealed that both filled and unfilled bio-polyol-based PUR foams exhibited lower degradation rate, heat release rate, and total smoke release compared with the reference material, indicating reduced flammability and a lower tendency toward fire propagation.

Schlagwörter

Stichwörter der Autor:innen

cone calorimeterextractivesfilleroxypropylationpine barkpolyurethanepropylene carbonate

Autor:innen und Institutionen

  • Latvian State Institute of Wood Chemistry, Dzerbenes Street 27, LV-1006 Riga, Latvia.

ORCID-Profile: Alexander Arshanitsa, Matiss Pals, Laima Vevere, Oskars Bikovens

Förderung

  • Innovation in Forest Management and Value Chain for Latvia’s Growth: New Forest Services. Products and Technologies

Zitieren

APA

Arshanitsa, A., Pals, M., Vjalikova, A., Vevere, L., Bikovens, O., & Jashina, L. (2025). Pine Bark as a Lignocellulosic Resource for Polyurethane Production: An Evaluation. Polymers, 18(1), 96. https://doi.org/10.3390/polym18010096

Vancouver

Arshanitsa A, Pals M, Vjalikova A, Vevere L, Bikovens O, Jashina L. Pine Bark as a Lignocellulosic Resource for Polyurethane Production: An Evaluation. Polymers. 2025;18(1):96. doi:10.3390/polym18010096

BibTeX
@article{Arshanitsa2025,
  author = {Arshanitsa, Alexander and Pals, Matiss and Vjalikova, Alexandra and Vevere, Laima and Bikovens, Oskars and Jashina, Lilija},
  title = {Pine Bark as a Lignocellulosic Resource for Polyurethane Production: An Evaluation},
  journal = {Polymers},
  year = {2025},
  volume = {18},
  number = {1},
  pages = {96},
  doi = {10.3390/polym18010096}
}
Kostenlos starten →