EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fatigue Performance of 3D-Printed Poly-Lactic-Acid Bone Scaffolds with Triply Periodic Minimal Surface and Voronoi Pore Structures

Hamed Bakhtiari iD, Alireza Nouri, Majid Tolouei-Rad iD

Polymers · 28.07.2024 · 16 (15) · 2145

DOI: 10.3390/polym16152145 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.07.2024. Verfasst von Hamed Bakhtiari und 2 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Advanced Materials and Manufacturing (CAMM), School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bone scaffolds serve a crucial role in tissue engineering, particularly in facilitating bone regeneration where natural repair is insufficient. Despite advancements in the fabrication of polymeric bone scaffolds, the challenge remains to optimize their mechanical resilience. Specifically, research on the fatigue behaviour of polymeric bone scaffolds is scarce. This study investigates the influence of pore architecture on the mechanical performance of poly-lactic-acid (PLA) scaffolds under quasi-static and cyclic compression. PLA scaffolds with a 60% porosity were fabricated using extrusion-based 3D printing in various designs: Gyroid, Lidinoid, Fischer–Koch, IWP, and Voronoi. Results demonstrated that Gyroid scaffolds had the highest compressive strength (6.6 MPa), followed by Lidinoid, Fischer–Koch, IWP, and Voronoi designs. Increased strut thickness was linked to higher compressive strength. However, normalized fatigue resistance showed a different pattern. While scaffolds resisted fatigue cycles at low strain amplitudes, fatigue damage was observed at higher strains. Voronoi structures exhibited the highest normalized fatigue performance, enduring around 58,000 cycles at 85% strain amplitude, followed by Gyroid, Fischer–Koch, Lidinoid, and IWP structures. Enhanced fatigue performance in different topologies correlated with the minimum cross-sectional area of scaffolds. Given the importance of both static and fatigue strength, the Gyroid topology emerges as the superior choice overall.

Schlagwörter

Stichwörter der Autor:innen

PLAadditive manufacturingbone scaffoldcompressionfatigue

Autor:innen und Institutionen

  • Centre for Advanced Materials and Manufacturing (CAMM), School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia.
  • School of Engineering, RMIT University, Melbourne, VIC 3001, Australia.

ORCID-Profile: Hamed Bakhtiari, Majid Tolouei-Rad

Zitieren

APA

Bakhtiari, H., Nouri, A., & Tolouei-Rad, M. (2024). Fatigue Performance of 3D-Printed Poly-Lactic-Acid Bone Scaffolds with Triply Periodic Minimal Surface and Voronoi Pore Structures. Polymers, 16(15), 2145. https://doi.org/10.3390/polym16152145

Vancouver

Bakhtiari H, Nouri A, Tolouei-Rad M. Fatigue Performance of 3D-Printed Poly-Lactic-Acid Bone Scaffolds with Triply Periodic Minimal Surface and Voronoi Pore Structures. Polymers. 2024;16(15):2145. doi:10.3390/polym16152145

BibTeX
@article{Bakhtiari2024,
  author = {Bakhtiari, Hamed and Nouri, Alireza and Tolouei-Rad, Majid},
  title = {Fatigue Performance of 3D-Printed Poly-Lactic-Acid Bone Scaffolds with Triply Periodic Minimal Surface and Voronoi Pore Structures},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {15},
  pages = {2145},
  doi = {10.3390/polym16152145}
}
Kostenlos starten →