EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Intraoral Scans of Full Dental Arches: An In Vitro Measurement Study of the Accuracy of Different Intraoral Scanners

Giovanni Giuliodori iD, Giorgio Rappelli, Luca Aquilanti iD

International Journal of Environmental Research and Public Health · 08.03.2023 · 20 (6) · 4776

DOI: 10.3390/ijerph20064776 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Environmental Research and Public Health, online erschienen am 08.03.2023. Verfasst von Giovanni Giuliodori und 2 weiteren Autor:innen. Beteiligte Einrichtung: Independent Researcher, Via Brecce Bianche 94, 60131 Ancona, Italy. Hauptthemen laut MEDLINE: Dental Arch, Models, Dental. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this in vitro study was to evaluate the accuracy of different intraoral scanners (IOS), according to different scanning strategies and to the experience of the operator. Six IOS setups were used in this study. Ten scans of a complete epoxy-resin-made maxillary dental arch were performed with each IOS, using four different scanning techniques (manufacturer-suggested scanning strategy, cut-out rescan technique, simplified scanning technique, novel scanning technique). Scans were also performed by an expert operator in the field of digital dentistry. An operator with no experience in the field of intraoral scans performed 10 scans following each of the scanning strategy suggested by the manufacturer. The master model was scanned with an industrial high-resolution reference scanner to obtain a highly accurate digitized reference model. All the digital models were aligned with the reference model using a software aimed at comparing the STL files. A total of n = 300 scans were performed. Once the data were pooled, Medit i700 and Primescan obtained the best results in terms of both trueness and precision, showing no statistically significative differences (p > 0.05) to the first and the second scanning technique, Medit i700 scanner allowed to obtain the best values both in terms of trueness (24.4 ± 2.1 μm and 21.4 ± 12.9 μm, respectively) and precision compared to other IOS (23.0 ± 1.6 μm and 30.0 ± 18.0 μm, respectively). When considering the third scanning technique, Medit i700 recorded the best values in terms of trueness while Primescan recorded the best values in terms of precision (24.0 ± 2.7 μm and 26.8 ± 13.7 μm, respectively). When considering the two operators, significant differences between the two were found only with Medit i700 (p < 0.001). The examined IOS showed statistically significant differences in terms of trueness and precision. The used scanning strategy is a factor influencing the accuracy of IOS. Considering the expertise of the operators, clinically scanning strategies are not operative sensitive in terms of accuracy.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental ArchModels, DentalComputer-Aided DesignImaging, Three-DimensionalMaxilla

Stichwörter der Autor:innen

accuracyfull dental archintraoral scannerprecisionscanning strategiestrueness

Autor:innen und Institutionen

  • Independent Researcher, Via Brecce Bianche 94, 60131 Ancona, Italy.
  • Department of Clinical Specialistic and Dental Sciences, Università Politecnica delle Marche, Via Tronto 10/A, 60126 Ancona, Italy.
  • Dentistry Clinic, National Institute of Health and Science of Aging, IRCCS INRCA, Via Tronto 10/A, 60126 Ancona, Italy.

ORCID-Profile: Giovanni Giuliodori, Luca Aquilanti

Zitieren

APA

Giuliodori, G., Rappelli, G., & Aquilanti, L. (2023). Intraoral Scans of Full Dental Arches: An In Vitro Measurement Study of the Accuracy of Different Intraoral Scanners. International Journal of Environmental Research and Public Health, 20(6), 4776. https://doi.org/10.3390/ijerph20064776

Vancouver

Giuliodori G, Rappelli G, Aquilanti L. Intraoral Scans of Full Dental Arches: An In Vitro Measurement Study of the Accuracy of Different Intraoral Scanners. International Journal of Environmental Research and Public Health. 2023;20(6):4776. doi:10.3390/ijerph20064776

BibTeX
@article{Giuliodori2023,
  author = {Giuliodori, Giovanni and Rappelli, Giorgio and Aquilanti, Luca},
  title = {Intraoral Scans of Full Dental Arches: An In Vitro Measurement Study of the Accuracy of Different Intraoral Scanners},
  journal = {International Journal of Environmental Research and Public Health},
  year = {2023},
  volume = {20},
  number = {6},
  pages = {4776},
  doi = {10.3390/ijerph20064776}
}
Kostenlos starten →