EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Strength Study of Indirect Permanent Restorations: 3D-Printed, Milled, and Conventional Dental Composites

João Paulo Mendes Tribst iD, Adelheid Veerman, Gabriel Kalil Rocha Pereira iD, Cornelis Johannes Kleverlaan iD, Amanda Maria de Oliveira Dal Piva iD

Clinics and Practice · 20.09.2024 · 14 (5) · 1940-1952

DOI: 10.3390/clinpract14050154 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinics and Practice, online erschienen am 20.09.2024. Verfasst von João Paulo Mendes Tribst und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Reconstructive Oral Care, Academic Centre for Dentistry Amsterdam (ACTA), Universiteit van Amsterdam and Vrije Universiteit, 1081LA Ams…. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: Limited research has been performed to assess the strength of resin-bonded 3D-printed restorations. Based on that, this study investigates the impact of different manufacturing methods on the fracture load of indirect composite restorations (ICRs) following an aging process.

Methods

Three manufacturing techniques—conventional (CRC), milled (MRC), and printed (PRC)—were evaluated using 60 specimens, each with a diameter of 10 mm and a thickness of 1.0 mm. Sandblasting with Al2O3 particles was employed to optimize the bonding process, significantly influencing surface roughness parameters (Ra, Rz, RSm). All specimens were bonded to the dentin analog using composite resin cement and subjected to either 10,000 thermocycles (TC) or storage (ST) at 37 °C in distilled water. Fracture load assessments were performed using a universal testing machine. A finite element analysis was conducted to assess stress distribution.

Results

Two-way ANOVA results indicated that the manufacturing method significantly affected mean fracture load values (p < 0.001), with PRC showing the highest mean fracture load (4185 ± 914 N), followed by MRC (2495 ± 941 N) and CRC (599 ± 292 N). The aging protocol did not have a significant impact on fracture load.

Conclusions

This study revealed that 3D-printed resin composite exhibited comparable strength to milled resin composite when adhesively cemented, suggesting it is a promising option for indirect composite restorations based on its mechanical performance. However, further research is needed to evaluate its bond strength and optimal surface treatment methods to prevent early debonding.

Schlagwörter

Stichwörter der Autor:innen

3D printingfinite element analysisfracture loadindirect composite restorations

Autor:innen und Institutionen

  • Department of Reconstructive Oral Care, Academic Centre for Dentistry Amsterdam (ACTA), Universiteit van Amsterdam and Vrije Universiteit, 1081LA Amsterdam, North Holland, The Netherlands.
  • Department of Restorative Dentistry, Faculty of Dentistry, Federal University of Santa Maria (UFSM), Santa Maria 97105900, Rio Grande do Sul State, Brazil.
  • Department of Dental Materials Science, Academic Centre for Dentistry Amsterdam (ACTA), Universiteit van Amsterdam and Vrije Universiteit, 1081LA Amsterdam, North Holland, The Netherlands.

ORCID-Profile: João Paulo Mendes Tribst, Gabriel Kalil Rocha Pereira, Cornelis Johannes Kleverlaan, Amanda Maria de Oliveira Dal Piva

Zitieren

APA

Tribst, J. P. M., Veerman, A., Pereira, G. K. R., Kleverlaan, C. J., & Dal Piva, A. M. O. (2024). Comparative Strength Study of Indirect Permanent Restorations: 3D-Printed, Milled, and Conventional Dental Composites. Clinics and Practice, 14(5), 1940-1952. https://doi.org/10.3390/clinpract14050154

Vancouver

Tribst JPM, Veerman A, Pereira GKR, Kleverlaan CJ, Dal Piva AMO. Comparative Strength Study of Indirect Permanent Restorations: 3D-Printed, Milled, and Conventional Dental Composites. Clinics and Practice. 2024;14(5):1940-1952. doi:10.3390/clinpract14050154

BibTeX
@article{Tribst2024,
  author = {Tribst, João Paulo Mendes and Veerman, Adelheid and Pereira, Gabriel Kalil Rocha and Kleverlaan, Cornelis Johannes and Dal Piva, Amanda Maria de Oliveira},
  title = {Comparative Strength Study of Indirect Permanent Restorations: 3D-Printed, Milled, and Conventional Dental Composites},
  journal = {Clinics and Practice},
  year = {2024},
  volume = {14},
  number = {5},
  pages = {1940--1952},
  doi = {10.3390/clinpract14050154}
}
Kostenlos starten →