EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Validation and Estimation of Obesity-Induced Intervertebral Disc Degeneration through Subject-Specific Finite Element Modelling of Functional Spinal Units

Nitesh Kumar Singh iD, Nishant K Singh iD, Rati Verma, Ashish D Diwan iD

Bioengineering · 31.03.2024 · 11 (4) · 344

DOI: 10.3390/bioengineering11040344 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioengineering, online erschienen am 31.03.2024. Verfasst von Nitesh Kumar Singh und 3 weiteren Autor:innen. Beteiligte Einrichtung: Computational Biomechanics Lab, Department of Biomedical Engineering, National Institute of Technology, Raipur 492010, India. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 107 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

(1)

Background

Intervertebral disc degeneration has been linked to obesity; its potential mechanical effects on the intervertebral disc remain unknown. This study aimed to develop and validate a patient-specific model of L3–L4 vertebrae and then use the model to estimate the impact of increasing body weight on disc degeneration. (2)

Methods

A three-dimensional model of the functional spinal unit of L3–L4 vertebrae and its components were developed and validated. Validation was achieved by comparing the range of motions (RoM) and intradiscal pressures with the previous literature. Subsequently, the validated model was loaded according to the body mass index and estimated stress, deformation, and RoM to assess disc degeneration. (3)

Results

During validation, L3–L4 RoM and intradiscal pressures: flexion 5.17° and 1.04 MPa, extension 1.54° and 0.22 MPa, lateral bending 3.36° and 0.54 MPa, axial rotation 1.14° and 0.52 MPa, respectively. When investigating the impact of weight on disc degeneration, escalating from normal weight to obesity reveals an increased RoM, by 3.44% during flexion, 22.7% during extension, 29.71% during lateral bending, and 33.2% during axial rotation, respectively. Also, stress and disc deformation elevated with increasing weight across all RoM. (4)

Conclusions

The predicted mechanical responses of the developed model closely matched the validation dataset. The validated model predicts disc degeneration under increased weight and could lay the foundation for future recommendations aimed at identifying predictors of lower back pain due to disc degeneration.

Schlagwörter

Stichwörter der Autor:innen

body mass indexdegenerationfinite element analysisintervertebral disclumbar spineobesity

Autor:innen und Institutionen

  • Computational Biomechanics Lab, Department of Biomedical Engineering, National Institute of Technology, Raipur 492010, India.
  • Biomechanics Lab, School of Biomedical Engineering, Indian Institute of Technology (BHU), Varanasi 221005, India.
  • Spine Labs & Spine Service, St George & Sutherland Campus, Clinical School of Faculty of Health & Medicine, University of New South Wales, Sydney, NSW 2502, Australia.

ORCID-Profile: Nitesh Kumar Singh, Nishant K Singh, Ashish D Diwan

Zitieren

APA

Singh, N. K., Singh, N. K., Verma, R., & Diwan, A. D. (2024). Validation and Estimation of Obesity-Induced Intervertebral Disc Degeneration through Subject-Specific Finite Element Modelling of Functional Spinal Units. Bioengineering, 11(4), 344. https://doi.org/10.3390/bioengineering11040344

Vancouver

Singh NK, Singh NK, Verma R, Diwan AD. Validation and Estimation of Obesity-Induced Intervertebral Disc Degeneration through Subject-Specific Finite Element Modelling of Functional Spinal Units. Bioengineering. 2024;11(4):344. doi:10.3390/bioengineering11040344

BibTeX
@article{Singh2024,
  author = {Singh, Nitesh Kumar and Singh, Nishant K and Verma, Rati and Diwan, Ashish D},
  title = {Validation and Estimation of Obesity-Induced Intervertebral Disc Degeneration through Subject-Specific Finite Element Modelling of Functional Spinal Units},
  journal = {Bioengineering},
  year = {2024},
  volume = {11},
  number = {4},
  pages = {344},
  doi = {10.3390/bioengineering11040344}
}
Kostenlos starten →