EUVIMEDEUVIMED entdecken
CrossrefInfokarte

Comparative evaluation of dental measurements using 3D virtual models and 3D printed models

Anju Treesa Jacob, Achint Juneja, Monis Raza, Nivedita Sharma, Ridhi Kothari

APOS Trends in Orthodontics · 2025-11-19 · 16 · 208-215

DOI: 10.25259/apos_240_2024 ↗
AbstractBibliografische Angaben

Abstract

Objectives: Accurate dental measurements are essential for orthodontic diagnosis, treatment planning, and long-term patient monitoring. With the increased use of digital workflows, 3D virtual models and 3D printed models are being adopted as alternatives to traditional plaster casts. This study aimed to evaluate and compare key orthodontic dental parameters obtained from 3D virtual models and 3D printed models to determine their reliability and potential for clinical interchangeability. Material and Methods: Seventeen pre-treatment intraoral scans (iTero, Align Technology, USA) meeting the inclusion criteria were analyzed. The scans were divided into three groups: Group A – 3D virtual models assessed using GOM Inspect software; Group B – 3D virtual models assessed using OrthoCAD software; and Group C – corresponding 3D printed models fabricated using a Phrozen Sonic Mighty 4K printer and evaluated with dental loupes and Vernier calipers. Measured parameters included maxillary and mandibular intercanine widths, intermolar widths, overjet, overbite, and Bolton’s overall and anterior ratios. Normality was assessed with the Shapiro–Wilk test. One-way analysis of variance was used for intergroup comparisons, Pearson’s correlation tested associations between methods, and the intraclass correlation coefficient (ICC) determined reproducibility. Results: All measurements followed a normal distribution. No statistically significant differences were found among the three groups for any parameter ( p > 0.05). For example, the mean maxillary intercanine width was 34.19 ± 1.36 mm (Group A), 34.41 ± 1.34 mm (Group B), and 34.17 ± 1.34 mm (Group C) ( p = 0.849). Mean mandibular intermolar width was 44.83 ± 2.77 mm (Group A), 44.89 ± 2.88 mm (Group B), and 44.72 ± 2.69 mm (Group C) ( p = 0.982). Overjet and overbite showed similarly close agreement, with p = 0.999 and 1.000, respectively. ICC analysis demonstrated excellent reproducibility across all methods (ICC = 0.98). Pearson’s correlation revealed strong agreement between GOM and 3D printed models for all parameters, while OrthoCAD showed weaker correlation for sum-of-teeth measurements and Bolton’s ratios. Conclusion: 3D virtual models and 3D printed models provide equivalent and reproducible dental measurements, making them reliable alternatives to conventional plaster models for orthodontic diagnosis, treatment planning, and outcome assessment. Given their interchangeability, digital workflows can be confidently integrated into clinical practice, offering advantages in storage, accessibility, and patient communication. Future research should explore their performance in severe crowding cases, assess cost-effectiveness, and investigate optimization of software such as OrthoCAD to improve consistency.

Wissen, das zu Ihrer Arbeit passt.

Vom kostenlosen Einstieg über die persönliche Recherche bis zur vollständigen Research Suite.

Tarife ansehen →

Sind alle Verlagsvolltexte enthalten?

Nein. Bibliografische Nachweise, Abstracts und Volltexte sind unterschiedliche Inhalte. Ob ein Volltext verfügbar ist, hängt von der Quelle, Open Access und Ihren vorhandenen Lizenzen ab. Ein EUVIMED-Tarif ersetzt keine zusätzlichen Verlagsrechte.

Tarife ansehen →