On the Development and Characterization of the Novel Portable Plasma Device "MobiPlas"
Plasma Medicine · 2024 · 14 (4) · 39-51
DOI: 10.1615/plasmamed.2025057641 ↗Abstract
A novel, portable noble gas plasma source called MobiPlas which is designed for medical applications is presented. This atmospheric pressure plasma jet (APPJ) features an integrated gas supply system using a refillable steel gas tank and works with argon. A continuous operation for approximately 10 min can be achieved with one gas filling. The device's power supply is facilitated by a mobile powerbank, controlled by a Raspberry Pi Pico that also provides the clock signal for the high-voltage generation. Key performance parameters, including ozone concentration, temperature evolution on a treatment target, and patient leakage current (PLC), were analyzed. Ozone levels remained below the EU threshold at distances greater than 20 cm, while the temperature at the treatment site stabilized around 40°C at the jet's effluent tip. The maximum PLC recorded was 11 μA, significantly below the IEC 60601-1 limit. However, the PLC exhibited instability, attributed to heating effects in the high-voltage generator's current limitation circuit. Due to the promising performance and the favorable form factor, the MobiPlas APPJ appears to be a suitable basis for further characterization and development, ultimately aiming for an approval and a commercialization as a medical cold plasma device.
EUVIMED