EUVIMEDEUVIMED entdecken
CrossrefInfokarte

Effectiveness of different surface treatments on bond strength between 3D‐printed teeth and denture base

Anne Karoline de Holanda Cavalcanti Pereira, Rayanna Thayse Florêncio Costa, Rafaella de Souza Leão, Bruno Gustavo da Silva Casado, Andre Ulisses Dantas Batista, Sandra Lúcia Dantas Moraes

Journal of Prosthodontics · 2026-10 · 35 (8) · 1281-1289

DOI: 10.1111/jopr.13941 ↗
AbstractBibliografische Angaben

Abstract

Abstract Purpose To investigate the effects of different surface treatments and thermal cycling on the shear bond strength between 3D‐printed teeth and denture bases. Materials and Methods For the shear bond strength (SBS) test, the specimens were the maxillary central incisors (11 × 9 × 7 mm) bonded on a cylindrical base (20 × 25 mm). The control group was heat‐cured polymethylmethacrylate (PMMA) ( N = 20). The printed group was divided into five subgroups ( N = 20): no treatment, sandblasting with aluminum oxide (Al 2 O 3 ), methyl methacrylate monomer, acetone, and adhesive with urethane dimethacrylate. Half of the samples were subjected to 2000 thermal cycling cycles, and all samples were subjected to the SBS test. The failure mode was established as adhesive, cohesive, or mixed through stereomicroscopic analysis. The surface roughness test (Sa) was performed using optical profilometry, and the rectangular specimens (14 × 14 × 2.5 mm) were divided into four groups according to the surface treatments ( N = 7 per group). Paired T and Wilcoxon tests were conducted to perform comparisons within the same group. The Kruskal–Wallis and Dwass‐Steel‐Critchlow‐Fligner post‐hoc tests were conducted to compare the groups. Results Al 2 O 3 sandblasting in the 3D‐printed groups achieved high SBS values comparable to those of the control group in the thermal cycled ( p = 0.962) and non‐thermal cycled samples ( p = 0.319). It was the only treatment capable of modifying the surface of the 3D‐printed resin, thereby increasing the roughness ( p = 0.016). Conclusions Sandblasting is recommended to increase the bond strength between the tooth and denture bases.

Wissen, das zu Ihrer Arbeit passt.

Vom kostenlosen Einstieg über die persönliche Recherche bis zur vollständigen Research Suite.

Tarife ansehen →

Sind alle Verlagsvolltexte enthalten?

Nein. Bibliografische Nachweise, Abstracts und Volltexte sind unterschiedliche Inhalte. Ob ein Volltext verfügbar ist, hängt von der Quelle, Open Access und Ihren vorhandenen Lizenzen ab. Ein EUVIMED-Tarif ersetzt keine zusätzlichen Verlagsrechte.

Tarife ansehen →