EUVIMEDEUVIMED entdecken
Crossref

Compressive modulus, translucency, and irradiance transmittance of clear PVS materials used for resin injection molding technique

Nadia Machado, Mateus G Rocha iD, Dayane Oliveira iD, Kevin G Reardon, Emerson Martins, Nathaniel C Lawson iD

Journal of Esthetic and Restorative Dentistry · 2025-02 · 37 (2) · 412-422

DOI: 10.1111/jerd.13270 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Esthetic and Restorative Dentistry, online erschienen am 30.05.2024. Verfasst von Nadia Machado und 5 weiteren Autor:innen. Beteiligte Einrichtung: Division of Biomaterials, UAB School of Dentistry, Birmingham, Alabama, USA. Hauptthemen laut MEDLINE: Siloxanes, Polyvinyls, Dental Impression Materials. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

To evaluate the compressive modulus, translucency, and light curing irradiance transmittance of four clear polyvinyl siloxane (PVS) materials used for the injection molding technique at varying thicknesses, and to assess the correlation between color parameters and irradiance transmittance. Materials and Methods Four clear PVS materials (Exaclear, Clear Bite Matrix, Affinity Crystal, and Memosil 2) were used in this study. Compressive modulus was measured by compressing cylindrical PVS specimens ( n = 9; d = 10 mm; t = 6 mm) up to 30% strain using a universal testing machine. For the translucency analysis and irradiance transmittance, specimens ( n = 5) were fabricated with five different thicknesses ( d = 12 mm and t = 2, 4, 6, 8 and 10 mm). The L*, a, *b* values of specimens were obtained using a CIELab spectrophotometer (CMD‐700, Konica Minolta) with calibrated white and black tiles; the translucency parameter was calculated. The same specimens were placed onto a spectrophotometer (MARC Light Collector) to measure irradiance transmitted through the specimens from a light curing unit (Valo Corded, Ultradent). Data were analyzed using analysis of variance (ANOVA) with Tukey post hoc test and the correlation between translucency and irradiance transmittance of materials for each thickness was evaluated using Pearson's correlation.

Results

Compressive modulus differences in PVS materials were significant (one‐way ANOVA: df = 3, F = 76.27, p < 0.001); Affinity and Memosil 2 were highest with no significant difference between them (Tukey: t = −1.62; p = 0.382). Clear Bite was higher than Exaclear (Tukey: t = −3.70; p = 0.004). Exaclear was lowest. Translucency decreased with thickness (Two‐way ANOVA: df = 3, F = 586.53, p < 0.001; thickness: df = 4, F = 1389.34, p < 0.001). Exaclear was most translucent at all thicknesses. L*, a*, b* values varied by material and thickness (L*: df = 3, F = 1213.32, p < 0.001; a*: df = 3, F = 10766.8, p < 0.001; b*: df = 3, F = 3260.42, p < 0.001). Memosil 2 had lowest b* values. Irradiance transmittance was affected by material and thickness (Two‐way ANOVA: df = 4, F = 2388.86, p < 0.001). Exaclear had highest irradiance transmission, surpassing control at >6 mm. Violet/blue irradiance ratio decreased with thickness; Exaclear maintained a constant ratio, indicating preserved violet irradiance. There was a strong positive correlation between translucency and light irradiance (Pearson's r = 0.97, R 2 = 0.86–0.96). Radiant exposure analysis suggests adjusting the curing time based on PVS thickness for optimal exposure (10 J/cm 2 ) is achievable within 13–14 s for

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SiloxanesPolyvinylsDental Impression MaterialsMaterials TestingColorHumansSpectrophotometryLight

Stichwörter der Autor:innen

clear impression materialcuring lightinjection moldinglight irradiancestamp technique

Substanzen

SiloxanesPolyvinylsvinyl polysiloxaneDental Impression Materials

Autor:innen und Institutionen

  • Division of Biomaterials, UAB School of Dentistry, Birmingham, Alabama, USA.
  • Center for Dental Biomaterials, College of Dentistry, University of Florida, Gainesville, Florida, USA.
  • Private Practice, Elmhurst, Illinois, USA.
  • Division of General Dental Sciences, UAB School of Dentistry, Birmingham, Alabama, USA.

ORCID-Profile: Mateus G Rocha, Dayane Oliveira, Nathaniel C Lawson

Zitieren

APA

Machado, N., Rocha, M. G., Oliveira, D., Reardon, K. G., Martins, E., & Lawson, N. C. (2025). Compressive modulus, translucency, and irradiance transmittance of clear PVS materials used for resin injection molding technique. Journal of Esthetic and Restorative Dentistry, 37(2), 412-422. https://doi.org/10.1111/jerd.13270

Vancouver

Machado N, Rocha MG, Oliveira D, Reardon KG, Martins E, Lawson NC. Compressive modulus, translucency, and irradiance transmittance of clear PVS materials used for resin injection molding technique. Journal of Esthetic and Restorative Dentistry. 2025;37(2):412-422. doi:10.1111/jerd.13270

BibTeX
@article{Machado2025,
  author = {Machado, Nadia and Rocha, Mateus G and Oliveira, Dayane and Reardon, Kevin G and Martins, Emerson and Lawson, Nathaniel C},
  title = {Compressive modulus, translucency, and irradiance transmittance of clear PVS materials used for resin injection molding technique},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2025},
  volume = {37},
  number = {2},
  pages = {412--422},
  doi = {10.1111/jerd.13270}
}
Kostenlos starten →