EUVIMEDEUVIMED entdecken
Crossref

Preparation, characterization, and properties of ceramic foams from waste foundry sand by particle‐stabilized foam method

Lihuan Luo, Xiaolei Song, Zhanyuan Chen, Zhenxin Duan, Ying Song, Yang Zhou

International Journal of Applied Ceramic Technology · 2026-02 · 23 (1)

DOI: 10.1111/ijac.70069 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Applied Ceramic Technology, online erschienen am 15.09.2025. Verfasst von Lihuan Luo und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 49 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Waste foundry sand (WFS) is a solid waste by‐product generated during the sand casting process in foundries. Promoting resourceful recycling of WFS is of significance for environmental and efficient resource utilization. In this study, WFS was used as the raw material to fabricate ceramic foams using the particle‐stabilized foam method. The results showed that the ball‐milled fine WFS particles in the slurry were able to adhere to air bubbles, leading to the formation of ceramic foams with closed pores after drying and sintering. The liquid phase generated during the sintering process from melted WFS contributed to the development of dense pore walls. The porosity of the ceramic foams first decreased from 30.93% to 22.83%, and then increased to 40.22% with the rise in slurry pH from 2 to 5. Moreover, the porosity gradually decreased from 49% to 3% as the sintering temperature increased from 1000°C to 1300°C. The variations in the pore structure significantly influenced their properties. The WFS‐based ceramic foams were produced with 0.68‒1.32 g/cm 3 volume density, 32.4‒210.3 MPa compressive strength, and 0.18‒0.87 W/(m K) thermal conductivity. This study facilitated the reuse of WFS, enhancing cost‐effective, efficient production of high‐performance ceramic materials for building insulation.

Zitieren

APA

Luo, L., Song, X., Chen, Z., Duan, Z., Song, Y., & Zhou, Y. (2026). Preparation, characterization, and properties of ceramic foams from waste foundry sand by particle‐stabilized foam method. International Journal of Applied Ceramic Technology, 23(1). https://doi.org/10.1111/ijac.70069

Vancouver

Luo L, Song X, Chen Z, Duan Z, Song Y, Zhou Y. Preparation, characterization, and properties of ceramic foams from waste foundry sand by particle‐stabilized foam method. International Journal of Applied Ceramic Technology. 2026;23(1). doi:10.1111/ijac.70069

BibTeX
@article{Luo2026,
  author = {Luo, Lihuan and Song, Xiaolei and Chen, Zhanyuan and Duan, Zhenxin and Song, Ying and Zhou, Yang},
  title = {Preparation, characterization, and properties of ceramic foams from waste foundry sand by particle‐stabilized foam method},
  journal = {International Journal of Applied Ceramic Technology},
  year = {2026},
  volume = {23},
  number = {1},
  doi = {10.1111/ijac.70069}
}
Kostenlos starten →