Metal‐Free Custom‐Made Zirconia Implants—A Prospective 5‐Year Follow‐Up Single‐Arm Clinical Trial
Clinical Implant Dentistry and Related Research · 2025
DOI: 10.1111/cid.13404 ↗Kurz gefasst
Klinische Studie in der Zeitschrift Clinical Implant Dentistry and Related Research, 2025. Verfasst von Jantien H W de Beus und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Periodontology, University of Groningen, University Medical Center Groningen, Center for Dentistry and Oral Hygiene, Groningen, Netherl…. Hauptthemen laut MEDLINE: Zirconium, Dental Prosthesis Design, Dental Implants, Dental Implants, Single-Tooth. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University Medical Center Groningen, ZV3 (Germany), Manufacturer of Zirconium Implants (ZrO2), Universitair Medisch Centrum Groningen.
Abstract (Originalsprache)
Background
Dental implants made of zirconia (ZrO 2 ) are a potential alternative for titanium implants in dentistry because of their good biocompatibility, mechanical properties and excellent aesthetic results. However, solid long‐term scientific data to prove clinical success of ZrO 2 implants are scarce.
Aim
The aim of this study was to describe and to examine the clinical performance of custom‐made two‐piece ZrO 2 implants, to identify possible influencing factors: a) manipulation of the implant after placement and b) the occlusal scheme on the survival rate, and to evaluate the performance of the implant‐supported crown. This follow‐up study collected and examined the 5‐year data to answer the main question: What are the survival and the success rates of custom‐made ZrO 2 implants in the maxillary premolar region after 5 years? Material and Methods Of the 31 included patients in this prospective 5‐year follow‐up single‐arm clinical trial, 30 received a custom‐made ZrO 2 implant to replace a missing single maxillary premolar, which was subsequently restored with a lithium disilicate crown. Parameters regarding clinical performance, marginal bone‐level (MBL) changes, and patient‐related outcome measures (PROMs) were assessed preoperatively, at the baseline, as well as 1 and 5 years after crown placement. Chances of survival and success of the implant were calculated and displayed using Kaplan–Meier statistics. Kaplan–Meier survival analysis was also performed with stratification based on the variables “manipulation of the implant prior to impression taking” and “occlusal scheme” and compared using log‐rank tests. Bone‐level moderation in time was compared using a paired samples t ‐test. Patient's expectations and satisfaction after 5 years were compared as a measure of fulfilled expectations, using a Wilcoxon signed‐rank test. Performance of the implant‐supported crowns was evaluated using validated criteria.
Results
Survival and success probabilities after 5 years were, respectively, 75.8% (95% CI [60.0%; 91.0%]) and 71.0% (95% CI [54.0%; 88.0%]) for the custom‐made ZV3 implants. No significant differences in survival rate were found after stratification on “manipulation of the implant” and on “occlusal scheme.” Mean bone‐level alteration between baseline and the first follow‐up was +0.06 mm (95% CI [−0.23 mm; 0.12 mm]; SD = 0.42 mm) and between baseline and the second follow‐up was +0.04 mm (95% CI [−0.35 mm; 0.26 mm]; SD = 0.54 mm). Patients' satisfaction for patients with implants still in function after 5 years was 91.7% (IQR = [90.5%–97.3%]), indicating satisfaction with the treatment. Pooled satisfaction in patients with successful implants after 5 years was significantly higher than patients' expressed expectations before treatment. None of the crowns failed, and no interventions were required. Conclusion and Clinical Implications Survival rate of these particular ZV3 implants in our study was lower than expected and clinically not acceptable. Hence, ZV3 implant placement as applied in this study cannot be recommended for clinical practice. Further research on the different appearances of mechanical failure in ZrO 2 implants would be highly recommended before a larger prospective randomized clinical trial is conducted to evaluate treatment with custom‐made ZrO 2 dental implants.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Periodontology, University of Groningen, University Medical Center Groningen, Center for Dentistry and Oral Hygiene, Groningen, Netherlands.
- Department of Oral Maxillofacial Surgery, University of Groningen, University Medical Center Groningen, Groningen, Netherlands.
- Department of Restorative Dentistry, University of Groningen, University Medical Center Groningen, Center for Dentistry and Oral Hygiene, Groningen, Netherlands.
- St. Antonius Hospital, Department of Oral Maxillofacial Surgery, Prosthodontics and Special Dental Care, Nieuwegein, Netherlands.
ORCID-Profile: Jantien H W de Beus, Marco S Cune, Henny J A Meijer, Gerry M Raghoebar, Ulf Schepke
Förderung
- University Medical Center Groningen
- ZV3 (Germany), Manufacturer of Zirconium Implants (ZrO2)
- Universitair Medisch Centrum Groningen
Zitieren
APA
Beus, J. H. W., Cune, M. S., Meijer, H. J. A., Raghoebar, G. M., & Schepke, U. (2025). Metal‐Free Custom‐Made Zirconia Implants—A Prospective 5‐Year Follow‐Up Single‐Arm Clinical Trial. Clinical Implant Dentistry and Related Research. https://doi.org/10.1111/cid.13404
Vancouver
Beus JHW, Cune MS, Meijer HJA, Raghoebar GM, Schepke U. Metal‐Free Custom‐Made Zirconia Implants—A Prospective 5‐Year Follow‐Up Single‐Arm Clinical Trial. Clinical Implant Dentistry and Related Research. 2025. doi:10.1111/cid.13404
BibTeX
@article{Beus2025,
author = {Beus, Jantien H W de and Cune, Marco S and Meijer, Henny J A and Raghoebar, Gerry M and Schepke, Ulf},
title = {Metal‐Free Custom‐Made Zirconia Implants—A Prospective 5‐Year Follow‐Up Single‐Arm Clinical Trial},
journal = {Clinical Implant Dentistry and Related Research},
year = {2025},
doi = {10.1111/cid.13404}
}
EUVIMED