EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electric-Field-Driven Surface Ionic Transport on Hydroxylated SiO2 Governs Transient Leakage and Hybrid Bonding Reliability

Yu-Xiang Huang, Huai-En Lin, Mai-Phuong La iD, Wei-Lan Chiu, Hsiang-Hung Chang, Guann Pyng Li, Chih Chen iD

ACS Applied Materials & Interfaces · 12.11.2026

DOI: 10.1021/acsami.6c16637 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 12.11.2026. Verfasst von Yu-Xiang Huang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu300093, Taiwan. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Ministry of Education, Taiwan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu/SiO2 hybrid bonding is critical for 3D integrated circuit packaging, where dielectric surface activation impacts bonding quality and long-term reliability. NaOH-based wet chemical activation is a promising approach for a scalable and cost-effective processing under ambient conditions. However, this route introduces residual ions at the SiO2 surface, raising concerns regarding electrical leakage and dielectric stability. In this study, electric-field-driven surface ionic transport on NaOH-activated SiO2 and its role in transient leakage and hybrid bonding reliability were investigated. Reversible and polarity-dependent transient current peaks observed in cyclic electrical measurements provide evidence for electric-field-driven migration of the mobile ionic species at the SiO2 interface. In addition, higher NaOH concentrations promoted greater residual Na+ accumulation and intensified transient leakage peaks, supporting the selection of 0.5 M NaOH as an effective activation condition. Systematic decoupling experiments demonstrate that residual mobile Na+ ions are the dominant contributors to the transient leakage current rather than fixed hydroxyl groups. Quantitative analysis reveals Na+ surface mobility of approximately 3 × 10–10 m2V–1s–1, an order-of-magnitude upper-bound estimate that is consistent between constant-bias and ramped-bias measurements and about six orders of magnitude higher than that in bulk SiO2, suggesting a surface-dominated transport. An optimized 3 min deionized water (DI) rinse reduces the mobile Na+ population below the electrical detection limit and decreases the Na 1s XPS intensity by roughly an order of magnitude, suppressing the transient leakage to near-baseline levels while maintaining hydrophilicity and achieving the SiO2–SiO2 bonding strength of 19.7 ± 1.8 MPa, comparable to Ar plasma activation. The leakage measurements were performed on Cu/SiO2 damascene comb structures, whereas the bonding validation addresses the dielectric part of the hybrid-bonding interface; Cu–Cu contact and long-term stress testing remain to be verified. This work provides a framework for understanding electric-field-driven surface ionic transport and practical guidelines for contamination control of the dielectric surface in wet-activated Cu/SiO2 hybrid bonding.

Schlagwörter

Stichwörter der Autor:innen

Cu/SiO2 hybrid bondingcontamination controlsurface ionic transporttransient leakage currentwet chemical surface activation

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu300093, Taiwan.
  • Electronic and Optoelectronic System Research Laboratories, Industrial Technology Research Institute (ITRI), Hsinchu310401, Taiwan.
  • Electrical Engineering and Computer Science, University of California, Irvine, California92697, United States.

ORCID-Profile: Mai-Phuong La, Chih Chen

Förderung

  • National Science and Technology Council
  • Ministry of Education, Taiwan

Zitieren

APA

Huang, Y. X., Lin, H. E., La, M. P., Chiu, W. L., Chang, H. H., Li, G. P., & Chen, C. (2026). Electric-Field-Driven Surface Ionic Transport on Hydroxylated SiO2 Governs Transient Leakage and Hybrid Bonding Reliability. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c16637

Vancouver

Huang YX, Lin HE, La MP, Chiu WL, Chang HH, Li GP, et al. Electric-Field-Driven Surface Ionic Transport on Hydroxylated SiO2 Governs Transient Leakage and Hybrid Bonding Reliability. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c16637

BibTeX
@article{Huang2026,
  author = {Huang, Yu-Xiang and Lin, Huai-En and La, Mai-Phuong and Chiu, Wei-Lan and Chang, Hsiang-Hung and Li, Guann Pyng and Chen, Chih},
  title = {Electric-Field-Driven Surface Ionic Transport on Hydroxylated SiO2 Governs Transient Leakage and Hybrid Bonding Reliability},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c16637}
}
Kostenlos starten →