EUVIMEDEUVIMED entdecken
Crossref

Interfacial Solvent Engineering Enables Hydrothermally Stable MXene Heterostructures for Printed Wearable Electronics

Pengfei Zong iD, Meng Zhu, Lin Guo, Siyuan Liu, Yuqiao Wang iD

ACS Applied Materials & Interfaces · 12.11.2026

DOI: 10.1021/acsami.6c16490 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 12.11.2026. Verfasst von Pengfei Zong und 4 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Nano Photoelectrochemistry and Devices, School of Chemistry and Chemical Engineering, Southeast University, Nanjing211189, China. Die Arbeit nennt 37 Literaturangaben. Gefördert von: Nanjing University of Aeronautics and Astronautics, Southeast University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Water-induced degradation of MXene during hydrothermal synthesis severely limits the construction of MXene-based heterostructures for further applications. Herein, an interfacial solvent-engineering strategy was developed to stabilize MXene under harsh hydrothermal conditions. Solvents with a stronger affinity for reactive Ti sites than water can preferentially adsorb at these sites. This competitive adsorption limits direct water–Ti contact and thereby suppresses subsequent MXene oxidation. DFT calculations were used to screen candidate solvents and support the proposed competitive adsorption mechanism, while the experimental results broadly followed the predicted trend. Deoxygenation experiments further supported the dominant role of water in MXene degradation. Molecular dynamics simulations revealed that preferential interfacial enrichment of DMF persists at 453 K despite enhanced thermal motion. In a 50 vol % DMF/H2O system, the MXene framework remained well preserved even under prolonged or higher-temperature hydrothermal treatment. This regulated solvent environment enabled the in situ growth of 1T-MoS2 on the preserved MXene framework. The conductive MXene framework and abundant active sites of 1T-MoS2 led to enhanced electrochemical performance. The resulting composite was further processed into printed microsupercapacitors and pressure sensors, which were integrated into a self-powered pressure-sensing system. This work establishes interfacial solvent engineering as an effective route to hydrothermally stable MXene heterostructures for printed wearable electronics.

Schlagwörter

Stichwörter der Autor:innen

MXeneheterostructuresoxidation suppressionprinted wearable electronicssolvent regulation

Autor:innen und Institutionen

  • Research Center for Nano Photoelectrochemistry and Devices, School of Chemistry and Chemical Engineering, Southeast University, Nanjing211189, China.
  • Yangtze River Delta Carbon Neutrality Strategy Development Institute, Southeast University, Nanjing210096, China.

ORCID-Profile: Pengfei Zong, Yuqiao Wang

Förderung

  • Nanjing University of Aeronautics and Astronautics
  • Southeast University

Zitieren

APA

Zong, P., Zhu, M., Guo, L., Liu, S., & Wang, Y. (2026). Interfacial Solvent Engineering Enables Hydrothermally Stable MXene Heterostructures for Printed Wearable Electronics. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c16490

Vancouver

Zong P, Zhu M, Guo L, Liu S, Wang Y. Interfacial Solvent Engineering Enables Hydrothermally Stable MXene Heterostructures for Printed Wearable Electronics. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c16490

BibTeX
@article{Zong2026,
  author = {Zong, Pengfei and Zhu, Meng and Guo, Lin and Liu, Siyuan and Wang, Yuqiao},
  title = {Interfacial Solvent Engineering Enables Hydrothermally Stable MXene Heterostructures for Printed Wearable Electronics},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c16490}
}
Kostenlos starten →