EUVIMEDEUVIMED entdecken
Crossref

Constructing a Cross‐Linked Interface in CF / PEEK Composites via Epoxy‐Terminated Cardo‐ PAEK and Aniline‐Functionalized Carbon Fibers

Yujia Xie, Qi Li, Jiaming Guo, Fuyuan Song, Shengtao Dai, Yu Liu

Polymer Composites · 20.11.2026 · 47 (22) · 20352-20364

DOI: 10.1002/pc.71609 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 07.09.2026. Verfasst von Yujia Xie und 5 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon fiber reinforced polymer composites (CFRPs) have attracted increasing attention for their superior properties. However, the insufficient thermal stability and structural discrepancy of conventional commercial epoxy‐based sizing agents lead to inherent limitations in the manufacture and application of CFRPs employing thermoplastic matrices such as polyamides and poly (ether‐ether‐ketone) (PEEK) resins. Towards this end, an epoxy‐terminated cross‐linkable emulsion sizing agent was prepared to improve heat resistance and interfacial matching with the PEEK matrix. This strategy utilizes aqueous diazonium reactions to decorate carbon fibers (CFs) surfaces with aniline ancillaries, which undergo chemical bonding with epoxy groups in Epoxy‐terminated bisphenol fluorene and 4,4′‐difluorobenzophenone binary copolymer (EP‐PBEK) to effectively improve the interfacial wettability between CFs and Poly (ether‐ether‐ketone) (PEEK) resin. The aqueous EP‐PBEK sizing agent which was formulated through an emulsion technique is environmentally sustainable and yields uniformly distributed nanoparticles with a mean diameter of roughly 192.7 nm. Experimental findings revealed that CF/PEEK composites modified with 1.5 wt.% EP‐PBEK possessed optimal interfacial performance. The values of interlaminar shear strength (ILSS), interfacial shear strength (IFSS) as well as flexural strength were measured at 94.29, 93.63 and 992.63 MPa separately, which were enhanced by 75.72%, 96.71% and 57.30% in contrast to DCF/PEEK composites. This study presents a green and efficient strategy to tailor high‐temperature‐resistant interfaces in CF/PEEK composites.

Zitieren

APA

Xie, Y., Li, Q., Guo, J., Song, F., Dai, S., & Liu, Y. (2026). Constructing a Cross‐Linked Interface in CF / PEEK Composites via Epoxy‐Terminated Cardo‐ PAEK and Aniline‐Functionalized Carbon Fibers. Polymer Composites, 47(22), 20352-20364. https://doi.org/10.1002/pc.71609

Vancouver

Xie Y, Li Q, Guo J, Song F, Dai S, Liu Y. Constructing a Cross‐Linked Interface in CF / PEEK Composites via Epoxy‐Terminated Cardo‐ PAEK and Aniline‐Functionalized Carbon Fibers. Polymer Composites. 2026;47(22):20352-20364. doi:10.1002/pc.71609

BibTeX
@article{Xie2026,
  author = {Xie, Yujia and Li, Qi and Guo, Jiaming and Song, Fuyuan and Dai, Shengtao and Liu, Yu},
  title = {Constructing a Cross‐Linked Interface in CF / PEEK Composites via Epoxy‐Terminated Cardo‐ PAEK and Aniline‐Functionalized Carbon Fibers},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {22},
  pages = {20352--20364},
  doi = {10.1002/pc.71609}
}
Kostenlos starten →