EUVIMEDEUVIMED entdecken
Crossref

Enhancing interlaminar fracture toughness of carbon fiber/epoxy composites toughened by polyethersulfone resin and hybrid carbon nanotubes/graphene oxide

Gongdong Wang, Xueqing Liu, Meng Wang, Mingchi Yu, Hongxiang Zhang, Long He

Polymer Composites · 10.04.2025 · 46 (5) · 4519-4533

DOI: 10.1002/pc.29256 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 07.11.2024. Verfasst von Gongdong Wang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 59 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, to improve the interlayer fracture toughness of carbon fiber reinforced polymer (CFRP) composites, polyethersulfone (PES)/carbon nanotubes (CNTs)/graphene oxide (GO) hybrid films were prepared by wet phase transition method based on a total of seven different ratios of CNTs and GO, 0:5, 1:4, 2:3, 1:1, 3:2, 4:1, and 0:5 (with a total concentration of 1 wt%). The optimal toughening system of hybrid particles mixed with thermoplastic resin films for CFRP composites was investigated by the double cantilever beam test and end notched flexure test. The results showed that when 20 wt% of PES was added to the film and the ratios of CNTs to GO were 3:2 and 2:3, respectively, the Mode I and II fracture toughness of the laminates were significantly enhanced. Compared with the original specimens, the increases were 123.66% and 204.55%, respectively. In addition, CNTs/GO = 3:2 had the best enhancement effect on the Mode I test, increasing by 111.84%, filling the gap in the effect of low temperature environment on the interlayer fracture performance of high‐performance composites. Finally, a scanning electron microscope was used to observe the microstructure of the fracture surface and analyze the toughening mechanism. Highlights Seven hybrid films with different ratios were prepared. The superiority of film for enhancing the fracture toughness was verified. Fills the gap in the interlayer toughness of samples at low temperature.

Zitieren

APA

Wang, G., Liu, X., Wang, M., Yu, M., Zhang, H., & He, L. (2025). Enhancing interlaminar fracture toughness of carbon fiber/epoxy composites toughened by polyethersulfone resin and hybrid carbon nanotubes/graphene oxide. Polymer Composites, 46(5), 4519-4533. https://doi.org/10.1002/pc.29256

Vancouver

Wang G, Liu X, Wang M, Yu M, Zhang H, He L. Enhancing interlaminar fracture toughness of carbon fiber/epoxy composites toughened by polyethersulfone resin and hybrid carbon nanotubes/graphene oxide. Polymer Composites. 2025;46(5):4519-4533. doi:10.1002/pc.29256

BibTeX
@article{Wang2025,
  author = {Wang, Gongdong and Liu, Xueqing and Wang, Meng and Yu, Mingchi and Zhang, Hongxiang and He, Long},
  title = {Enhancing interlaminar fracture toughness of carbon fiber/epoxy composites toughened by polyethersulfone resin and hybrid carbon nanotubes/graphene oxide},
  journal = {Polymer Composites},
  year = {2025},
  volume = {46},
  number = {5},
  pages = {4519--4533},
  doi = {10.1002/pc.29256}
}
Kostenlos starten →