Post‐Synthetic Thioesterification of Carboxyl‐Functionalized HCP for Enhanced CO 2 Capture and Selectivity
Macromolecular Rapid Communications · 29.10.2026
DOI: 10.1002/marc.70463 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, online erschienen am 29.10.2026. Verfasst von Yahya Alemin und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Material Chemistry for Energy Conversion and Storage, Ministry of Education, Hubei Key Laboratory of Material Chemistry and Service…. Die Arbeit nennt 53 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hubei Province, Key R&D Project of Wuhan City.
Abstract (Originalsprache)
Post‐synthetic modification (PSM) is an effective route to improve the CO 2 capture and CO 2 /N 2 selectivity of hyper‐cross‐linked polymers (HCPs) by introducing tailored adsorption sites. A key challenge, however, is achieving these improvements without substantially compromising porosity. Here, we report a simple PSM strategy that incorporates multiple CO 2 ‐philic functionalities through a condensation reaction between a carboxyl‐functionalized HCP (HCP‐TRIP) and thiourea‐formaldehyde resin, yielding a thioester‐functionalized material (HCP‐TRIP‐P). The modification largely preserves the porous framework, with only a minor reduction in Brunauer‐Emmett‐Teller (BET) surface area from 843 to 794 m 2 g −1 . In parallel, CO 2 uptake increases by 43%, from 15.4 wt.% to 22.0 wt.% at 273 K and 1 bar. The CO 2 /N 2 selectivity is also markedly enhanced, rising from 31 to 82 as estimated by the Henry initial slope method, and from 25 to 53 based on ideal adsorbed solution theory (IAST) predictions for a CO 2 /N 2 (15/85 v/v) gas mixture at 298 K and 1 bar. Dynamic breakthrough experiments confirm effective CO 2 /N 2 separation under dry and 50% RH conditions; HCP‐TRIP‐P retains > 99% adsorption capacity over five cycles at 273 K. This work demonstrates a facile PSM route to simultaneously enhance CO 2 adsorption and CO 2 /N 2 selectivity while maintaining the intrinsic porosity of the HCPs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Material Chemistry for Energy Conversion and Storage, Ministry of Education, Hubei Key Laboratory of Material Chemistry and Service Failure, School of Chemistry and Chemical Engineering, Huazhong Unive…
ORCID-Profile: Xiaoyan Wang, Hui Gao, Bien Tan
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Hubei Province
- Key R&D Project of Wuhan City
- Natural Science Foundation of Wuhan City
- Innovation and Talent Recruitment Base of New Energy Chemistry and Device
- Open Research Fund of the Key Laboratory of Material Chemistry for Energy Conversion and Storage (HUST), Ministry of Education
Zitieren
APA
Alemin, Y., Qin, H., Hu, J., Xie, P., Wang, X., Gao, H., & Tan, B. (2026). Post‐Synthetic Thioesterification of Carboxyl‐Functionalized HCP for Enhanced CO 2 Capture and Selectivity. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.70463
Vancouver
Alemin Y, Qin H, Hu J, Xie P, Wang X, Gao H, et al. Post‐Synthetic Thioesterification of Carboxyl‐Functionalized HCP for Enhanced CO 2 Capture and Selectivity. Macromolecular Rapid Communications. 2026. doi:10.1002/marc.70463
BibTeX
@article{Alemin2026,
author = {Alemin, Yahya and Qin, Haojie and Hu, Jiarui and Xie, Peixuan and Wang, Xiaoyan and Gao, Hui and Tan, Bien},
title = {Post‐Synthetic Thioesterification of Carboxyl‐Functionalized HCP for Enhanced CO 2 Capture and Selectivity},
journal = {Macromolecular Rapid Communications},
year = {2026},
doi = {10.1002/marc.70463}
}
EUVIMED