Analysis of soft tissue integration‐supportive cell functions in gingival fibroblasts cultured on 3D printed biomaterials for oral implant‐supported prostheses
Journal of Biomedical Materials Research Part A · 2024
DOI: 10.1002/jbm.a.37675 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part A, 2024. Verfasst von Kerstin Rabel und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dentistry, Center for Dental Medicine, Medical Center-University of Freiburg, Faculty of Medicine, University of Freiburg, F…. Hauptthemen laut MEDLINE: Fibroblasts, Gingiva, Printing, Three-Dimensional, Biocompatible Materials. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Berta-Ottenstein-Program for Advanced Clinician Scientists, Faculty of Medicine, University of Freiburg, Progress in Science and Education with Ceramics (PROSEC).
Abstract (Originalsprache)
To date, it is unknown whether 3D printed fixed oral implant‐supported prostheses can achieve comparable soft tissue integration (STI) to clinically established subtractively manufactured counterparts. STI is mediated among others by gingival fibroblasts (GFs) and is modulated by biomaterial surface characteristics. Therefore, the aim of the present work was to investigate the GF response of a 3D printed methacrylate photopolymer and a hybrid ceramic‐filled methacrylate photopolymer for fixed implant‐supported prostheses in the sense of supporting an STI. Subtractively manufactured samples made from methacrylate polymer and hybrid ceramic were evaluated for comparison and samples from yttria‐stabilized tetragonal zirconia polycrystal (3Y‐TZP), comprising well documented biocompatibility, served as control. Surface topography was analyzed by scanning electron microscopy and interferometry, elemental composition by energy‐dispersive x‐ray spectroscopy, and wettability by contact angle measurement. The response of GFs obtained from five donors was examined in terms of membrane integrity, adhesion, morphogenesis, metabolic activity, and proliferation behavior by a lactate‐dehydrogenase assay, fluorescent staining, a resazurin‐based assay, and DNA quantification. The results revealed all surfaces were smooth and hydrophilic. GF adhesion, metabolic activity and proliferation were impaired by 3D printed biomaterials compared to subtractively manufactured comparison surfaces and the 3Y‐TZP control, whereas membrane integrity was comparable. Within the limits of the present investigation, it was concluded that subtractively manufactured surfaces are superior compared to 3D printed surfaces to support STI. For the development of biologically optimized 3D printable biomaterials, consecutive studies will focus on the improvement of cytocompatibility and the synthesis of STI‐relevant extracellular matrix constituents.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Prosthetic Dentistry, Center for Dental Medicine, Medical Center-University of Freiburg, Faculty of Medicine, University of Freiburg, Freiburg, Germany.
- Department of Oral Biotechnology, Center for Dental Medicine, Medical Center-University of Freiburg, Faculty of Medicine, University of Freiburg, Freiburg, Germany.
- G.E.R.N Research Center for Tissue Replacement, Regeneration and Neogenesis, Department of Prosthetic Dentistry, Center for Dental Medicine, Medical Center-University of Freiburg, Faculty of Medicine, University of Frei…
- Division Materials and Production-RISE Research Institutes of Sweden, Mölndal, Sweden.
ORCID-Profile: Kerstin Rabel
Förderung
- Berta-Ottenstein-Program for Advanced Clinician Scientists, Faculty of Medicine, University of Freiburg
- Progress in Science and Education with Ceramics (PROSEC)
Zitieren
APA
Rabel, K., Nath, A. J., Nold, J., Spies, B. C., Wesemann, C., Altmann, B., Adolfsson, E., Witkowski, S., Tomakidi, P., & Steinberg, T. (2024). Analysis of soft tissue integration‐supportive cell functions in gingival fibroblasts cultured on 3D printed biomaterials for oral implant‐supported prostheses. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.37675
Vancouver
Rabel K, Nath AJ, Nold J, Spies BC, Wesemann C, Altmann B, et al. Analysis of soft tissue integration‐supportive cell functions in gingival fibroblasts cultured on 3D printed biomaterials for oral implant‐supported prostheses. Journal of Biomedical Materials Research Part A. 2024. doi:10.1002/jbm.a.37675
BibTeX
@article{Rabel2024,
author = {Rabel, Kerstin and Nath, Amélie Joséphine and Nold, Julian and Spies, Benedikt C and Wesemann, Christian and Altmann, Brigitte and Adolfsson, Erik and Witkowski, Siegbert and Tomakidi, Pascal and Steinberg, Thorsten},
title = {Analysis of soft tissue integration‐supportive cell functions in gingival fibroblasts cultured on 3D printed biomaterials for oral implant‐supported prostheses},
journal = {Journal of Biomedical Materials Research Part A},
year = {2024},
doi = {10.1002/jbm.a.37675}
}
EUVIMED