EUVIMEDEUVIMED entdecken
Crossref

Thermal behavior of banana pseudostem–wood dust hybrid particleboards bonded with phenol–formaldehyde resin

Mohd Azril Riduan, Mohanad El‐Harbawi, Mohd Jumain Jalil

Environmental Progress & Sustainable Energy · 10.11.2026

DOI: 10.1002/ep.70791 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Progress & Sustainable Energy, online erschienen am 10.11.2026. Verfasst von Mohd Azril Riduan und 2 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates the thermal behavior of phenol–formaldehyde (PF)‐bonded banana pseudostem–wood dust (BPS–WD) hybrid particleboards. Boards with BPS:WD ratios of 100:0, 70:30, and 50:50 were fabricated at a target density of 0.50 g cm − 3, a nominal size of 340 mm × 340 mm × 25 mm, a fixed PF loading of 5 wt% on a dry‐particle basis, and a hot‐press temperature of 181°C. Thermogravimetric analysis (TGA) was used to compare mass‐loss behavior up to approximately 800°C and final residue, while differential scanning calorimetry (DSC) was used for comparative interpretation of the retained heat‐flow curves. All formulations showed an initial mass loss below approximately 100°C, followed by the principal lignocellulosic degradation region and slower high‐temperature decomposition. The 100:0 formulation produced the highest final residual mass (12.72%), followed by 70:30 (6.03%) and 50:50 (1.42%). The remaining residue may include both carbonaceous char and inorganic mineral ash; therefore, residual mass was not interpreted as a direct ranking of overall board quality. The DSC profiles also differed among the formulations, demonstrating that the BPS:WD ratio affected heat‐flow response. These findings establish a focused thermal comparison of PF‐bonded BPS–WD particleboards and provide a basis for future work using fully recorded quantitative thermal‐transition parameters.

Zitieren

APA

Riduan, M. A., El‐Harbawi, M., & Jalil, M. J. (2026). Thermal behavior of banana pseudostem–wood dust hybrid particleboards bonded with phenol–formaldehyde resin. Environmental Progress & Sustainable Energy. https://doi.org/10.1002/ep.70791

Vancouver

Riduan MA, El‐Harbawi M, Jalil MJ. Thermal behavior of banana pseudostem–wood dust hybrid particleboards bonded with phenol–formaldehyde resin. Environmental Progress & Sustainable Energy. 2026. doi:10.1002/ep.70791

BibTeX
@article{Riduan2026,
  author = {Riduan, Mohd Azril and El‐Harbawi, Mohanad and Jalil, Mohd Jumain},
  title = {Thermal behavior of banana pseudostem–wood dust hybrid particleboards bonded with phenol–formaldehyde resin},
  journal = {Environmental Progress & Sustainable Energy},
  year = {2026},
  doi = {10.1002/ep.70791}
}
Kostenlos starten →