Mechanical and Durability Performance of Concrete Incorporating Shredded Waste Polyethylene Terephthalate ( PET ) as Partial Fine Aggregate Replacement
Engineering Reports · 2026-11 · 8 (11)
DOI: 10.1002/eng2.71158 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering Reports, online erschienen am 09.11.2026. Verfasst von Yeabsra Mulugeta Alamir und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The growing demand for concrete has increased the consumption of natural sand, while the accumulation of polyethylene terephthalate (PET) bottle waste has created significant environmental challenges. Reusing waste PET in concrete offers a sustainable approach to reducing plastic waste and conserving natural aggregates. This study experimentally evaluated shredded waste polyethylene terephthalate (SPET) particles (< 2 mm) as a partial replacement for fine aggregate in C‐25 concrete. Unlike previous studies primarily focused on compressive strength, this research provides an integrated assessment of workability, density, compressive strength, flexural strength, and water permeability. Fine aggregate was replaced with SPET at 0%, 5%, 10%, 15%, and 20% by mass. A total of 90 hardened concrete specimens, including cubes and beams, were prepared and tested following ASTM and standard laboratory procedures. Increasing SPET content improved workability, with slump increasing from 92 mm for the control mix to 172 mm at 20% replacement. Fresh and hardened unit weights decreased progressively because of the lower density of PET compared with natural sand. At 28 days, compressive strength decreased only slightly from 33.30 MPa for the control mix to 33.00 and 32.77 MPa at 5% and 10% SPET replacement, respectively. Flexural strength exhibited a similar trend, with only minor reductions up to 10% replacement. Water permeability testing showed penetration depths of 14–19 mm, with 32.14% higher penetration at 20% SPET due to ITZ porosity and binder dilution, while all mixtures maintained low water ingress. The results demonstrate that replacing fine aggregate with up to 10% SPET establishes a safe structural threshold rather than an enhancement optimum, producing concrete with acceptable mechanical and durability performance while promoting sustainable recycling of plastic waste and reducing reliance on natural sand.
Zitieren
APA
Alamir, Y. M., Tamene, A. K., Tarekegn, A. G., Lemlem, T. Y., & Mohammed, T. A. (2026). Mechanical and Durability Performance of Concrete Incorporating Shredded Waste Polyethylene Terephthalate ( PET ) as Partial Fine Aggregate Replacement. Engineering Reports, 8(11). https://doi.org/10.1002/eng2.71158
Vancouver
Alamir YM, Tamene AK, Tarekegn AG, Lemlem TY, Mohammed TA. Mechanical and Durability Performance of Concrete Incorporating Shredded Waste Polyethylene Terephthalate ( PET ) as Partial Fine Aggregate Replacement. Engineering Reports. 2026;8(11). doi:10.1002/eng2.71158
BibTeX
@article{Alamir2026,
author = {Alamir, Yeabsra Mulugeta and Tamene, Awoke Kelemu and Tarekegn, Abrham Gebre and Lemlem, Tatek Yenehun and Mohammed, Tesfaye Alemu},
title = {Mechanical and Durability Performance of Concrete Incorporating Shredded Waste Polyethylene Terephthalate ( PET ) as Partial Fine Aggregate Replacement},
journal = {Engineering Reports},
year = {2026},
volume = {8},
number = {11},
doi = {10.1002/eng2.71158}
}
EUVIMED