EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessing the suitability of fused deposition modeling to produce acrylic removable denture bases

Khalid K Alanazi, Duncan Wood, Joanna Shepherd, Christopher W Stokes, Ilida Ortega Asencio iD

Clinical and Experimental Dental Research · 2024

DOI: 10.1002/cre2.880 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical and Experimental Dental Research, 2024. Verfasst von Khalid K Alanazi und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Clinical Dentistry, University of Sheffield, Sheffield, UK. Hauptthemen laut MEDLINE: Denture Bases, Polymethyl Methacrylate, Printing, Three-Dimensional, Computer-Aided Design. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Prince Sattam Bin Abdulaziz University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To study the feasibility of using poly methyl methacrylate (PMMA) filament and fused deposition modeling (FDM) to manufacture denture bases via the development of a study that considers both conventional and additive‐based manufacturing techniques. Materials and Methods Five sample groups were compared: heat and cold cured acrylic resins, CAD/CAM milled PMMA, 3D‐printed PMMA (via FDM), and 3D‐printed methacrylate resin (via stereolithography, SLA). All groups were subjected to mechanical testing (flexural strength, impact strength, and hardness), water sorption and solubility tests, a tooth bonding test, microbiological assessment, and accuracy of fit measurements. The performance of sample groups was referred to ISO 20795‐1 and ISO/TS 19736. The data was analyzed using one‐way ANOVA.

Results

Samples manufactured using FDM performed within ISO specifications for mechanical testing, water sorption, and solubility tests. However, the FDM group failed to achieve the ISO requirements for the tooth bonding test. FDM samples presented a rough surface finish which could ultimately encourage an undesirable high level of microbial adhesion. For accuracy of fit, FDM samples showed a lower degree of accuracy than existing materials.

Conclusions

Although FDM samples were a cost‐effective option and were able to be quickly manufactured in a reproducible manner, the results demonstrated that current recommended testing regimes for conventionally manufactured denture‐based polymers are not directly applicable to additive‐manufactured denture base polymers. Therefore, new standards should be developed to ensure the correct implementation of additive manufacturing techniques within denture‐based fabrication workflow.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Denture BasesPolymethyl MethacrylatePrinting, Three-DimensionalComputer-Aided DesignMaterials TestingAcrylic ResinsDenture DesignHumansFeasibility StudiesDental MaterialsDental BondingSurface PropertiesStereolithographyFlexural StrengthHardnessSolubility

Stichwörter der Autor:innen

3D‐printed denturefused deposition modeling (FDM)polymethylmethacrylate (PMMA)stereolithography (SLA)

Substanzen

Polymethyl MethacrylateAcrylic ResinsDental Materials

Autor:innen und Institutionen

  • School of Clinical Dentistry, University of Sheffield, Sheffield, UK.
  • Conservative Dental Science Department, College of Dentistry, Prince Sattam Bin Abdulaziz University, Saudi Arabia.

ORCID-Profile: Ilida Ortega Asencio

Förderung

  • Prince Sattam Bin Abdulaziz University

Zitieren

APA

Alanazi, K. K., Wood, D., Shepherd, J., Stokes, C. W., & Asencio, I. O. (2024). Assessing the suitability of fused deposition modeling to produce acrylic removable denture bases. Clinical and Experimental Dental Research. https://doi.org/10.1002/cre2.880

Vancouver

Alanazi KK, Wood D, Shepherd J, Stokes CW, Asencio IO. Assessing the suitability of fused deposition modeling to produce acrylic removable denture bases. Clinical and Experimental Dental Research. 2024. doi:10.1002/cre2.880

BibTeX
@article{Alanazi2024,
  author = {Alanazi, Khalid K and Wood, Duncan and Shepherd, Joanna and Stokes, Christopher W and Asencio, Ilida Ortega},
  title = {Assessing the suitability of fused deposition modeling to produce acrylic removable denture bases},
  journal = {Clinical and Experimental Dental Research},
  year = {2024},
  doi = {10.1002/cre2.880}
}
Kostenlos starten →