EUVIMEDEUVIMED entdecken
Crossref

Band Engineering via Back Surface Field Layer for High‐Performance Self‐Powered CZTSSe Thin‐Film Near‐Infrared Photodetectors

Yongmao Chi, Youwei Zhang, Yiheng Zhang, Jiang Zhao iD

Luminescence · 2026-11 · 41 (11)

DOI: 10.1002/bio.70668 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Luminescence, online erschienen am 03.11.2026. Verfasst von Yongmao Chi und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Integrated Circuit Science and Engineering, Nanjing University of Posts and Telecommunications, Nanjing, China. Hauptthemen laut MEDLINE: Copper, Zinc, Tin. Die Arbeit nennt 48 Literaturangaben. Gefördert von: Natural Science Foundation of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To meet the application requirements of high sensitivity, low dark current, and self‐powered near‐infrared photodetection, a Cu 2 ZnSn(S,Se) 4 (CZTSSe) thin‐film photodetector is designed and optimized in this work via SCAPS‐1D numerical simulation. This study investigates the effects of key parameters of the absorber layer, window layer, and back surface field (BSF) layer on the quantum efficiency, dark current, responsivity, and detectivity of the device. It also clarifies the performance enhancement mechanism from the perspectives of band structure engineering and dark current suppression. The introduction of the BSF layer creates a favorable back surface field at the rear interface of the device, which effectively suppresses the transport of minority carriers to the back electrode, reduces interface recombination and dark current, and thus significantly improves the device performance. Among the investigated BSF materials, Cu 2 O exhibits the optimal performance enhancement effect owing to its well‐matched band alignment with CZTSSe. After further optimization of the layer thickness, doping concentration, and defect density, the photodetector achieves a high responsivity (0.79 A/W) and detectivity (9.32 × 10 12 Jones) at a wavelength of 1020 nm, while maintaining a low dark current. The results demonstrate that the optimized device holds promising application potential in near‐infrared photodetection.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CopperZincTinSurface PropertiesInfrared RaysElectrodes

Stichwörter der Autor:innen

CZTSSe photodetectorsback surface field layerdark currentdetectivityresponsivity

Substanzen

CopperZincTin

Autor:innen und Institutionen

  • College of Integrated Circuit Science and Engineering, Nanjing University of Posts and Telecommunications, Nanjing, China.
  • Nantong Institute of Nanjing University of Posts and Telecommunications, Nantong, China.

ORCID-Profile: Jiang Zhao

Förderung

  • Natural Science Foundation of Jiangsu Province

Zitieren

APA

Chi, Y., Zhang, Y., Zhang, Y., & Zhao, J. (2026). Band Engineering via Back Surface Field Layer for High‐Performance Self‐Powered CZTSSe Thin‐Film Near‐Infrared Photodetectors. Luminescence, 41(11). https://doi.org/10.1002/bio.70668

Vancouver

Chi Y, Zhang Y, Zhang Y, Zhao J. Band Engineering via Back Surface Field Layer for High‐Performance Self‐Powered CZTSSe Thin‐Film Near‐Infrared Photodetectors. Luminescence. 2026;41(11). doi:10.1002/bio.70668

BibTeX
@article{Chi2026,
  author = {Chi, Yongmao and Zhang, Youwei and Zhang, Yiheng and Zhao, Jiang},
  title = {Band Engineering via Back Surface Field Layer for High‐Performance Self‐Powered CZTSSe Thin‐Film Near‐Infrared Photodetectors},
  journal = {Luminescence},
  year = {2026},
  volume = {41},
  number = {11},
  doi = {10.1002/bio.70668}
}
Kostenlos starten →